Programme Information | Study information

1. Programme Title: Engineering	NQF Level:	6

2. Description of the Programme (as in the Business Approval Form)
The (General) Engineering programme at Exeter is part of a wider family of Engineering programmes that have been developed around several core principles that distinguish them as innovative, forward looking and student centred. Exeter’s approach to engineering education emphasis collaborative project based learning (PBL), contextualised teaching and an emphasis on skills development and practical application of knowledge. Our engineering programmes also equip students with an awareness of entrepreneurship and the skills and confidence to apply their engineering knowledge in entrepreneurial endeavours. This is achieved through our novel Entrepreneurship 1 & 2 modules.

2. Description of the Programme (as in the Business Approval Form)

The (General) Engineering programme at Exeter is part of a wider family of Engineering programmes that have been developed around several core principles that distinguish them as innovative, forward looking and student centred. Exeter’s approach to engineering education emphasis collaborative project based learning (PBL), contextualised teaching and an emphasis on skills development and practical application of knowledge. Our engineering programmes also equip students with an awareness of entrepreneurship and the skills and confidence to apply their engineering knowledge in entrepreneurial endeavours. This is achieved through our novel Entrepreneurship 1 & 2 modules.

3. Educational Aims of the Programme
The BEng degree programme is designed to deliver all of the required learning outcomes as set out in UK-SPEC for a bachelors degree, and hence contributes towards graduates becoming professionally qualified engineers in the UK, with international recognition. The programme aims to enable students to become: a) flexible engineering graduates equipped to work effectively within engineering design and practice contributing specialist skills, demonstrating an awareness of the context within which they work, and taking responsibility for their own personal and professional development; b) graduates who need only to complete an appropriate period of further study or matching section to be educationally qualified to become chartered engineers within the appropriate sector of industry. c) aware of the environmental, economic, social and sustainability issues that are an integral part of the professional engineer's role in society; d) able to work well in multi-disciplinary groups with experience of communication, organization, planning and logistics. Through this programme, the College will provide students with: learning opportunities to match their abilities and aspirations, personal academic and pastoral support throughout their university career, appropriate methods of teaching and assessment and a programme of study that they find demanding, interesting and intellectually stimulating, while allowing them to enjoy other aspects of university life. The College will also seek to promote the role of industry and engineering institutions and the benefits that they can provide

3. Educational Aims of the Programme

The BEng degree programme is designed to deliver all of the required learning outcomes as set out in UK-SPEC for a bachelors degree, and hence contributes towards graduates becoming professionally qualified engineers in the UK, with international recognition.

The programme aims to enable students to become:

a) flexible engineering graduates equipped to work effectively within engineering design and practice contributing specialist skills, demonstrating an awareness of the context within which they work, and taking responsibility for their own personal and professional development;

b) graduates who need only to complete an appropriate period of further study or matching section to be educationally qualified to become chartered engineers within the appropriate sector of industry.

c) aware of the environmental, economic, social and sustainability issues that are an integral part of the professional engineer's role in society;

d) able to work well in multi-disciplinary groups with experience of communication, organization, planning and logistics.

Through this programme, the College will provide students with: learning opportunities to match their abilities and aspirations, personal academic and pastoral support throughout their university career, appropriate methods of teaching and assessment and a programme of study that they find demanding, interesting and intellectually stimulating, while allowing them to enjoy other aspects of university life. The College will also seek to promote the role of industry and engineering institutions and the benefits that they can provide

4. Programme Structure
The BEng Engineering programme is a 3 year programme of study at Regulated Qualification Framework (RQF) level 6 (as confirmed against the FHEQ). This programme is divided into 3 ‘stages’. Each stage is normally equivalent to an academic year. The programme is also divided into units of study called ‘modules’ which are assigned a number of ‘credits’. The credit rating of a module is proportional to the total workload, with 1 credit being nominally equivalent to 10 hours of work.

4. Programme Structure

The BEng Engineering programme is a 3 year programme of study at Regulated Qualification Framework (RQF) level 6 (as confirmed against the FHEQ). This programme is divided into 3 ‘stages’. Each stage is normally equivalent to an academic year. The programme is also divided into units of study called ‘modules’ which are assigned a number of ‘credits’. The credit rating of a module is proportional to the total workload, with 1 credit being nominally equivalent to 10 hours of work.

5. Programme Modules
The programme consists of 360 credits with 120 credits taken at each stage. Normally not more than 75 credits would be allowed in any one term. In total, students normally take no more than 150 credits at level 1, and must take at least 90 credits at level 3. The pass mark for award of credit in an individual module is 40%.

5. Programme Modules

The programme consists of 360 credits with 120 credits taken at each stage. Normally not more than 75 credits would be allowed in any one term. In total, students normally take no more than 150 credits at level 1, and must take at least 90 credits at level 3.

The pass mark for award of credit in an individual module is 40%.

Stage 1

Code	Title	Credits	Compulsory	NonCondonable
ENG1002	Engineering Mathematics and Scientific Computing	30	Yes	No
ENG1005	Multi-Disciplinary Group Challenge Project	30	Yes	No
ENG1006	Entrepreneurship 1	15	Yes	No
ENG1007	Fundamentals of Mechanics	15	Yes	No
ENG1008	Fundamentals of Materials	15	Yes	No
ENG1009	Fundamentals of Electronics	15	Yes	No

The first year of the Engineering programme is shared with all engineering disciplines and strikes a balance between providing core engineering and mathematical knowledge and making the learning experience engaging and exciting. A year-long multi-disciplinary group project provides an over-arching vehicle for PBL and a means of putting core knowledge into practice in a collaborative group setting. Project briefs are developed in response to the core module content. To support the students’ project work they undertake workshops in sketching, report / technical writing and study / research skills. Students develop essential knowledge in Engineering Mathematics and Scientific Computing through a year-long module. By combining Mathematics and Programming, students develop both the mathematical knowledge that underpins engineering science and the skills to put this knowledge to use by harnessing the power of programming. The first also includes three 15-credit modules, 'Fundamentals of Mechanics', 'Fundamentals of Materials', and 'Fundamentals of Electronics'. All modules are delivered using a PBL framework that encourages students to become independent learners.

On progression from 1st to 2nd year, students will have the opportunity to specialise on one of the following disciplines:

Civil Engineering
Mechanical Engineering
Electronic Engineering
Engineering and Management
Engineering & Entrepreneurship

6. Programme Outcomes Linked to Teaching, Learning & Assessment Methods
On successfully completing the programme you will be able to:	Intended Learning Outcomes (ILOs) will be accommodated & facilitated by the following learning & teaching and evidenced by the following assessment methods:
A Specialised Subject Skills & Knowledge	Learning & Teaching Activities
A Specialised Subject Skills & Knowledge	Assessment Methods
B Academic Discipline Core Skills & Knowledge	Learning & Teaching Activities
B Academic Discipline Core Skills & Knowledge	Assessment Methods
C Personal / Transferable / Employment Skills & Knowledge	Learning & Teaching Activities
C Personal / Transferable / Employment Skills & Knowledge	Assessment Methods

7. Programme Regulations
Credit The programme consists of 360 credits with 120 credits taken at each stage. Normally not more than 75 credits would be allowed in any one term. In total, students normally take no more than 150 credits at level 1, and must take at least 90 credits at level 3. The pass mark for award of credit in an individual module is 40%. Condonement Condonement is the process that allows you to be awarded credit (and so progress to the next stage or, in the final stage, receive an award), despite failing to achieve a pass mark at a first attempt. You are not entitled to reassessment in condoned credit. 15 or 30 credits of failure can be condoned in a stage. The following conditions apply: You must have registered for and participated in modules amounting to at least 120 credits in the stage. You must pass the modules marked with a 'Yes' in the 'non-condonable' column in the tables above. You must achieve and average mark of at least 40% across the full 120 credits of assessment in the stage, including any failed and condoned modules. Condonement can only be applied to one failed 15 credit module in a stage with a mark no greater than 10% below the normal pass mark (i.e. between 30-39), or to one failed 30 credit module in a stage with a mark no greater than 5% below the normal pass mark (i.e. between 35-39). Condonement will only be permitted where the total failed credit in a stage does not exceed 30. In cases where 2x15 credit modules have been failed within the condonable range, the 15 credits with the highest failed mark will be condoned. Assessment and Awards UG Programmes: Assessment at stage one does not contribute to the summative classification of the award. The award will normally be based on the degree mark formed from the credit weighted average marks for stages 2 and 3 combined in the ratio 1:2 respectively. Classification The marking of modules and the classification of awards broadly corresponds to the following percentage marks: Class I 70% + Class II Division I 60-69% Class II Division II 50-59% Class III 40-49% Full details of assessment regulations for UG programmes can be found in the Teaching Quality Assurance Manual (TQA) on the University of Exeter website. Generic marking criteria are also published here. Please see the Teaching and Quality Assurance Manual for further guidance.

7. Programme Regulations

Credit

The pass mark for award of credit in an individual module is 40%.

Condonement

Condonement is the process that allows you to be awarded credit (and so progress to the next stage or, in the final stage, receive an award), despite failing to achieve a pass mark at a first attempt. You are not entitled to reassessment in condoned credit.

15 or 30 credits of failure can be condoned in a stage. The following conditions apply:

You must have registered for and participated in modules amounting to at least 120 credits in the stage.

You must pass the modules marked with a 'Yes' in the 'non-condonable' column in the tables above.

You must achieve and average mark of at least 40% across the full 120 credits of assessment in the stage, including any failed and condoned modules.

Condonement can only be applied to one failed 15 credit module in a stage with a mark no greater than 10% below the normal pass mark (i.e. between 30-39), or to one failed 30 credit module in a stage with a mark no greater than 5% below the normal pass mark (i.e. between 35-39).

Condonement will only be permitted where the total failed credit in a stage does not exceed 30. In cases where 2x15 credit modules have been failed within the condonable range, the 15 credits with the highest failed mark will be condoned.

Assessment and Awards

UG Programmes: Assessment at stage one does not contribute to the summative classification of the award. The award will normally be based on the degree mark formed from the credit weighted average marks for stages 2 and 3 combined in the ratio 1:2 respectively.

Classification

The marking of modules and the classification of awards broadly corresponds to the following percentage marks:

Class I 70% +

Class II Division I 60-69%

Class II Division II 50-59%

Class III 40-49%

Full details of assessment regulations for UG programmes can be found in the Teaching Quality Assurance Manual (TQA) on the University of Exeter website. Generic marking criteria are also published here.

Please see the Teaching and Quality Assurance Manual for further guidance.

8. College Support for Students and Students' Learning
In accordance with University policy a system of personal tutors is in place for all students on this programme. A University-wide statement on such provision is included in the University's TQA Manual. As a student enrolled on this programme you will receive the personal and academic support of the Programme Coordinator and will have regular scheduled meetings with your Personal Tutor; you may request additional meetings as and when required. The role of personal tutors is to provide you with advice and support for the duration of the programme and extends to providing you with details of how to obtain support and guidance on personal difficulties such as accommodation, financial difficulties and sickness. You can also make an appointment to see individual teaching staff. Information Technology (IT) Services provide a wide range of services throughout the Exeter campuses including open access computer rooms, some of which are available 24 hours, 7 days a week. Help may be obtained through the Helpdesk, and most study bedrooms in halls and flats are linked to the University's campus network. Additionally, the College has its own dedicated IT support staff, helpdesk and computer facilities which are linked to the wider network, but which also provide access to some specialised software packages. Email is an important channel of communication between staff and students in the College and an extensive range of web-based information (see https://intranet.exeter.ac.uk/emps/) is maintained for the use of students, including a comprehensive and annually revised student handbook. The Harrison Learning Resource Centre is generally open during building open hours. The Centre is available for quiet study, with four separate rooms that can be booked for meetings and group work. Amongst its facilities, the Learning Resource Centre has a number of desks, four meeting rooms with large LCD screens, and free use of a photocopier. Also available are core set texts from your module reading lists, and undergraduate and MSc projects from the past two years. Online Module study resources provide materials for modules that you are registered for, in addition to some useful subject and IT resources. Generic study support resources, library and research skills, past exam papers, and the 'Academic Honesty and Plagiarism' module are also available through the student portal (http://vle.exeter.ac.uk) Student/Staff Liaison Committee enables students & staff to jointly participate in the management and review of the teaching and learning provision.

8. College Support for Students and Students' Learning

In accordance with University policy a system of personal tutors is in place for all students on this programme. A University-wide statement on such provision is included in the University's TQA Manual. As a student enrolled on this programme you will receive the personal and academic support of the Programme Coordinator and will have regular scheduled meetings with your Personal Tutor; you may request additional meetings as and when required. The role of personal tutors is to provide you with advice and support for the duration of the programme and extends to providing you with details of how to obtain support and guidance on personal difficulties such as accommodation, financial difficulties and sickness. You can also make an appointment to see individual teaching staff.

Information Technology (IT) Services provide a wide range of services throughout the Exeter campuses including open access computer rooms, some of which are available 24 hours, 7 days a week. Help may be obtained through the Helpdesk, and most study bedrooms in halls and flats are linked to the University's campus network.

Additionally, the College has its own dedicated IT support staff, helpdesk and computer facilities which are linked to the wider network, but which also provide access to some specialised software packages. Email is an important channel of communication between staff and students in the College and an extensive range of web-based information (see https://intranet.exeter.ac.uk/emps/) is maintained for the use of students, including a comprehensive and annually revised student handbook.

The Harrison Learning Resource Centre is generally open during building open hours. The Centre is available for quiet study, with four separate rooms that can be booked for meetings and group work. Amongst its facilities, the Learning Resource Centre has a number of desks, four meeting rooms with large LCD screens, and free use of a photocopier. Also available are core set texts from your module reading lists, and undergraduate and MSc projects from the past two years.

Online Module study resources provide materials for modules that you are registered for, in addition to some useful subject and IT resources. Generic study support resources, library and research skills, past exam papers, and the 'Academic Honesty and Plagiarism' module are also available through the student portal (http://vle.exeter.ac.uk)

Student/Staff Liaison Committee enables students & staff to jointly participate in the management and review of the teaching and learning provision.

10. Admission Criteria
All applications are considered individually on merit. The University is committed to an equal opportunities policy with respect to gender, age, race, sexual orientation and/or disability when dealing with applications. It is also committed to widening access to higher education to students from a diverse range of backgrounds and experience. Candidates must satisfy the general admissions requirements of the University of Exeter. For entry to the BEng Engineering Programme, academic entry requirements are: Normally completion of 12 years of education; A/AS 200 points (local language A/AS Levels are accepted); IB 24 points; Country-specific entry qualifications can be obtained from INTO Admissions. English: IELTS 5.5 with a minimum of 5.5 in all subskills (or equivalent) Minimum grade C in GCSE Maths; IB Maths SL / HL 3 if not offered at O level / GCSE; or Minimum Year 12 Pass in Maths; Unless otherwise specified Subjects recognised must relate to 'academic’ subjects or modules only.

10. Admission Criteria

All applications are considered individually on merit. The University is committed to an equal opportunities policy with respect to gender, age, race, sexual orientation and/or disability when dealing with applications. It is also committed to widening access to higher education to students from a diverse range of backgrounds and experience.

Candidates must satisfy the general admissions requirements of the University of Exeter.

For entry to the BEng Engineering Programme, academic entry requirements are:

Normally completion of 12 years of education;

A/AS 200 points (local language A/AS Levels are accepted); IB 24 points; Country-specific entry qualifications can be obtained from INTO Admissions.

English: IELTS 5.5 with a minimum of 5.5 in all subskills (or equivalent)

Minimum grade C in GCSE Maths; IB Maths SL / HL 3 if not offered at O level / GCSE; or Minimum Year 12 Pass in Maths;

Unless otherwise specified Subjects recognised must relate to 'academic’ subjects or modules only.

11. Regulation of Assessment and Academic Standards
Each academic programme in the University is subject to an agreed College assessment and marking strategy, underpinned by institution-wide assessment procedures. The security of assessment and academic standards is further supported through the appointment of External Examiners for each programme. External Examiners have access to draft papers, course work and examination scripts. They are required to attend the Board of Examiners and to provide an annual report. Annual External Examiner reports are monitored at both College and University level. Their responsibilities are described in the University's code of practice. See the University's TQA Manual for details.

11. Regulation of Assessment and Academic Standards

Each academic programme in the University is subject to an agreed College assessment and marking strategy, underpinned by institution-wide assessment procedures.

The security of assessment and academic standards is further supported through the appointment of External Examiners for each programme. External Examiners have access to draft papers, course work and examination scripts. They are required to attend the Board of Examiners and to provide an annual report. Annual External Examiner reports are monitored at both College and University level. Their responsibilities are described in the University's code of practice. See the University's TQA Manual for details.

12. Indicators of Quality and Standards
Certain programmes are subject to accreditation and/ or review by professional and statutory regulatory bodies (PSRBs).

14	Awarding Institution	University of Exeter
15	Lead College / Teaching Institution	College of Engineering, Mathematics and Physical Sciences
16	Partner College / Institution
17	Programme accredited/validated by
18	Final Award(s)	BEng (Hons)
19	UCAS Code (UG programmes)	H101
20	NQF Level of Final Awards(s):	6
21	Credit (CATS and ECTS)	360 (180 ECTS)
22	QAA Subject Benchmarking Group (UG and PGT programmes)	Engineering

23	Origin Date	February 8th 2023	Last Date of Revision:	February 8th 2023

Engineering (2023)

1. Programme Title:

Engineering

NQF Level:

6

2. Description of the Programme (as in the Business Approval Form)

3. Educational Aims of the Programme

4. Programme Structure

5. Programme Modules

Stage 1

6. Programme Outcomes Linked to Teaching, Learning & Assessment Methods

A Specialised Subject Skills & Knowledge

Learning & Teaching Activities

Assessment Methods

B Academic Discipline Core Skills & Knowledge

Learning & Teaching Activities

Assessment Methods

C Personal / Transferable / Employment Skills & Knowledge

Learning & Teaching Activities

Assessment Methods

7. Programme Regulations

8. College Support for Students and Students' Learning

10. Admission Criteria

11. Regulation of Assessment and Academic Standards

12. Indicators of Quality and Standards